Canon 1200D Instruction Manual Download Page 52

Page: 52 / 342

The LCD monitor can display the shooting settings screen, menu
screen, captured images, etc.

When you turn on the power, the
shooting settings will be displayed.

When you press the shutter button
halfway, the display will turn off.
And when you let go of the shutter
button, the display will turn on.

You can also turn off the display by
pressing the <

> button.

Press

the button again to turn on the
display.

Switching the LCD Monitor Display

Shooting Settings

Appears when you press the
<

> button. Press the

button again to return to the
shooting settings screen.

Appears when you press the
<

> button. Press the button

again to return to the shooting
settings screen.

Menu Functions

Captured Image

You can set [

2: LCD off/on btn

] so that the shooting settings display

does not keep turning off and on (p.193).

Even when the menu screen or captured image is displayed, pressing
the shutter button will enable you to shoot immediately.

Summary of Contents for 1200D























































































































































































































































































































































Search results

Summary of Contents for 1200D

Reviews:

Brands by name

Popular brands

Canon 1200D, Instruction Manual

Search results

Summary of Contents for 1200D

Reviews:

Brands by name

Popular brands