Canon 1200D Instruction Manual Download Page 217

Page: 217 / 342

217

Editing a Movie’s First and Last Scenes

Save the edited movie.

Select [

], then press <

The save screen will appear.

To save it as a new movie, select
[

New file

]. To save it and overwrite

the original movie file, select
[

Overwrite

], then press <

On the confirmation screen, select
[

], then press <

> to save the

edited movie and return to the movie
playback screen.

Since the editing is performed in approx. 1-sec. increments (position
indicated by [

] on the top of the screen), the actual position where the

movie is edited may differ from the position you specified.

If the card does not have enough free space, [

New file

] will not be

available.

When the battery level is low, movie editing is not possible. Use a fully-
charged battery.

Summary of Contents for 1200D























































































































































































































































































































































Search results

Summary of Contents for 1200D

Reviews:

Related manuals for 1200D

Brands by name

Popular brands

Canon 1200D, Instruction Manual

Search results

Summary of Contents for 1200D

Reviews:

Related manuals for 1200D

Brands by name

Popular brands