manualshive.com logo in svg

Canon 1000D - EOS Rebel XS Transcend 8GB Memory Cards, Instruction Manual

Share
Download
Canon 1000D - EOS Rebel XS Transcend 8GB Memory Cards Instruction Manual Download Page 102

102

Under [

7

 

Custom Functions (C.Fn)

], 

when [

AF during Live View shooting

] 

(p.157) is set to [

1: Quick mode

] or [

2: Live 

mode

], you can focus with AF. Quick mode 

and Live mode use a different AF method.
If you want precise focusing, magnify the 
image and focus manually. (p.98)

This is the same as using AF (p.60, 61) as usual with the dedicated AF 
sensor. Although you can focus the desired area quickly, the Live View 
image will be interrupted momentarily during the AF operation.

Set to Quick mode, the lens focus mode switch to <

f

>, and the 

AF mode to <

X

>.

1

Select the AF point.

 

Before starting Live View shooting, 
select the AF point.

 

Press the <

S

> button and press the 

<

S

> key to select the AF point.

 

Press the shutter button halfway for 
shooting ready.

2

Display the Live View image.

 

Press <

0

>.

X

The Live View image will appear on 
the LCD monitor.

 

The selected AF point will be 
displayed.

 

The focusing frame (larger frame) will 
also be displayed.

Using AF to Focus

N

C.Fn-7-1: Quick mode

AF point

COP

Y

Summary of Contents for 1000D - EOS Rebel XS Transcend 8GB Memory Cards





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands