CANNY 7 Demo Kit. Quick Start Guide.
Figure 5. Normal order of using CANNY 7 Demo Kit.
5
Rev.08122017
Start
Turn USB Mode Switch
to position «DATA»
Is the device first-time
connected to PC?
Wait for automatic
Windows driver setup
Choose «Device»->«Connect»
at main menu of CannyLab
Run integrated development
environment CannyLab
Successful driver setup?
Prepare CANNY 7 Demo Kit
for work and connect it to PC
(see page 3)
Upload the firmware
to the controller
by using CannyLab
development environment
Load user's diagram
to the controller
Turn USB mode switch to
«OFF» position to disconnect
the controller from PC
Turn USB mode switch
to «POWER» position to
power up the controller
Turn USB mode switch to
«OFF» position to
power down the controller
Verify the operation of
the user diagram by simulating
external IO and observing
the operation of the controller
Turn USB Mode Switch
to «OFF» position to
disconnect the controller from PC
Try connection again?
Is the controller's
green LED turned on?
Is the revision of
the user chart needed?
End
yes
no
yes
no
yes
no
no
yes
yes
no
Does the device already
have a firmware?
Do you need to overwrite
the firmware?
no
yes
no
yes
Is the controller's
green LED blinking?
yes
no
