Cannondale Mountain Hardtail Thru Axle, Quick Start Manual

Page: 9 / 16

Step 4. Set your saddle height.
To set saddle height, first verify the dropper seatpost is fully extended.
Loosen the seat collar and pull the seatpost out to expose the
minimum insertion line. The seatpost needs to be inserted into the
frame beyond this line.
Raise the saddle to roughly the point of your hip.
To tighten the seatpost quick release, tighten the adjusting nut until
the lever is hard enough to close that it leaves a mark, or imprint on
the palm of your hand.
When riding, you should have a slight bend in your knee when the
pedal is at the bottom of its rotation.
A.
B.
C.
D.
E.
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
A
B
D
E