Cannondale Mountain Hardtail Thru Axle, Quick Start Manual

Page: 10 / 16

Some final pre-ride checks.
Torque Bolts. Select the correct bit and install it into the torque
wrench.
Look for torque specification markings on the front and back of the
stem. If these markings are absent, torque all bolts to 7 Nm.
Torque the stem faceplate bolts in an “X” pattern, ensuring the gap
between the stem body and faceplate is consistent at the top and
bottom.
Once you’ve found your correct dropper seatpost height, you may
have some excess cable slack. Gently pull the dropper post cable from
the handlebar toward the front of the bike to take out the additional
slack.
A.
B.
C.
D.
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
A
B
C
D