117.PDF
7
100mm
SEATPOST
SEATTUBE
Top of the seat tub
e.
Seat bin
der sho
wn rem
oved fo
r clarity
Minimum Seat Post Insert Depth (MOTO CARBON)
For moto carbon frames, the seat post must be inserted a minimum of 100mm or 4 inches
WARNING
MAKE SURE AT LEAST 100 mm OF THE SEAT POST IS INSERTED INTO THE FRAME AT ALL
TIMES.
Failure to insert the seat post at least 100 mm can place a very high stress on the seat
tube top tube junction causing the frame to fail while riding.
remove the seat post. measure 100 mm from the bottom of the seat post. Use a permanent
marker to mark the post at 100 mm. When adjusting the seat post height in the seat tube,
never adjust the seat post so that the line you mark is above the top edge of the seat tube.
yoU mUst aLso Be aWare tHat bicycle seat posts are permanently marked by the
manufacturer with a “minimUm insert” line on the seat post itself. you must not rely on this
marking as an indication of the proper minimUm seat Post insertion DePtH.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT
IF YOU IGNORE THIS WARNING.
