Cannondale Lefty Ocho 120, Owner'S Manual Supplement, Page: 19 / 30

19
Technical Information
GuideGuard
5 N·m
2
2
1 N·m
1 N·m
1
2
3
4
6
5
7
9
8
GuideGuard
The GuideGuard (6) and protects the Lefty lower leg
from damage and the C-tube (3) supports the brake
line.
Periodically, check the GuideGuard and C-tube to
make sure they are in good condition and attached
properly with the mounting screws.
NOTICE
Do not ride, stop riding if parts are missing or
damaged.
Replace both the Guide-Guard (6) parts or
C-tube (3) with a new ones.
Replacement
1. Place the bike in a workstand and remove the
front wheel. See “Wheel Removal.”
2. Insert a 4mm hex key through the drive- side of
the Lefty spindle until into the head of the fi xing
bolt (8). Turn counter-clockwise and remove
the bolt from the spindle end.
3. Lift the upper rubber clip (1) holding the guide
(3) to the clip mount (2) of the Lefty.
4. Remove the small fi xing screw (7). Release the
brake line from within the guard tube (3) and
remove the guard (6) and attached C- tube (3)
from the Lefty.
5. See “Replacement Parts.”
Fit the new parts to the Lefty in reverse order.
Apply Loctite where indicated and tighten all
fasteners to the specifi ed tightening torque.