Cannondale Lefty Ocho 120, Owner'S Manual Supplement, Page: 16 / 30

16
Lefty Ocho 120 Owner’s Manual
138227 Rev 1 01/21)
Technical Information
Front Wheel
Installation
1. With bike in a work stand, clean the
spindle (1), and axle threads (a). Apply
light grease to the threads (a) and outer (b)
and inner (c) hub bearing lands.
a
b
c
NGLI-2
NGLI-2
NGLI-2
NGLI-2
1
Figure 8
3. Check the inside of the Lefty wheel hub for
dirt or contamination, wipe clean if
necessary. Apply light grease to the hub
bearing inner races.
4. Align and slide the wheel straight on to the
spindle. Using a 5 mm hex key by hand,
start engagement of the axle bolt to a few
threads to confirm correct thread
engagement. Once confirmed, tighten
the axle bolt to
15 N·m with a torque wrench.
6. With the StopLock release lever turned
down, slide the brake mount/caliper into
the Lefty.
As you do this, make sure the brake rotor
locates between the brake pads.
7. With the brake mount firmly seated to the
Lefty, turn the StopLock release lever up
to lock the brake adapter/caliper onto the
lower leg.
LOCKED
LOCKED
Figure 10