Cannondale Lefty Jake, Owner'S Manual

Page: 6 / 24

6
bolt the brake rotor onto the hub, be sure that the
seals rests against the large cartridge bearing and
that the rotor holds the seal in place. The seal keeps
out water and dirt contamination, and a missing seal
will result in premature bearing wear.
FORK SETUP
CABLE & LINE ROUTING
Front brake line
T h e f r o n t b r a k e l i n e r o u t i n g s h o u l d n o t pa s s
between the headtube and fork leg. Rather, the
brake line should pass from the lever through the two
cable guides on the outside of the fork leg.
NOTE :
The brake line should not be held tightly in the
cable guides. The guide loops need to be loose
enough to allow the brake line to slide freely up
and down.
1.
Front brake line
2.
Front brake line guides
3.
Front brake caliper
4.
Front brake lever
5.
Front derailleur cable
6.
Rear derailleur cable
7.
Rear brake line
4
2
1
3
7
5
6
2
4
1
3