Cannondale Kids with Training Wheels, Quick Start Manual

Page: 4 / 16

Getting your bike ready for assembly.
Let’s get your bike out of the box.
This video applies to one Cannondale Platform:
• Kid’s Trail 12 & 16
Tools Needed:
• Flat-Head Screwdriver
• Phillips-Head Screwdriver
• Box Cutter
• Scissors
Tools Included:
• Torque Wrench
• Allen Keys
• Pedal Wrench
Gently lift your bike out of the box and set it
on the ground.
Inside the box, you’ll find a smaller box of parts, necessary tools,
documentation and manuals. Once the bike is assembled, but
before you ride, please read the owner’s manual.
First, locate the staples on the top of the box and carefully remove
them with a screwdriver. Use caution: the staples are sharp.
Remove the small parts box and saddle/seatpost and set them aside.
Push the hand flaps from the inside to the outside of the box. This
will make removing the bike easier.
Carefully lift the bike out of the box and set it onto the top of the box.
Once the bike is assembled, but before you ride, please read the
owner’s manual.
Locate your warranty card and set it aside with your owner’s manual.
A.
B.
C.
D.
E.
F.
F
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 STEP 5 PRE-RIDE CHECK