Cannondale Kids with Training Wheels, Quick Start Manual, Page: 11 / 16

Some final pre-ride checks.
Torque Bolts. Select the correct bit and install it into the torque
wrench. Look for the torque specification markings on the front
and back of the stem, as well as the seatpost. If these markings are
absent, torque all stem and seat collar bolts to 7 Nm.
Confirm the handlebar is centered and at the correct angle, then
torque the stem bolts in an “X” pattern to the specified value, ensuring
the gap between the faceplate and stem body remains even from top
to bottom.
Torque the seatpost bolt to the value specified on the collar.
Wheel Engagement. Before riding the bicycle, firmly tighten the front
and rear axle nuts. The wrench should leave a mark, or impression on
your hand.
A.
B.
C.
D.
A
B
C
D
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 STEP 5 PRE-RIDE CHECK