9
127534.PDF
BosCH Charger
To ensure maximum operating range, make sure battery charge level is 100% before each ride.
Figure 6.
1. BOSCH Charger
2. Wall cord
3. AC Voltage Switch
4. Power LED
5. Charger Connector
6. Battery Jack
7. Charge FAST, SLOW Button
8. Charger ventilation.
to charge the battery:
see Figure 6.
Remove the battery from the bicycle rack. Bring battery indoors and allow time for it to charge at room
temperature. Make sure the charger (1) is set-up for the correct voltage (2) and connected to the wall outlet (3). Confirm that
the charger is ready; the LED (4) will be on. Attach the charging connector (5) to the battery jack. (6) Set the rate of charge
“SLOW or FAST” with the button (7) on top of the charger. Allow sufficient time for battery to remain connected to the charger
to reach a full charge. During charging, make sure the charger ventilation openings (8) are clear. Do not cover the battery or
charger.
When the battery is fully charged, remove the charging connector and unplug the charger from the wall outlet. Reinstall and lock
the battery into the bicycle rack.
see also BosCH Instructions
0 275 007 900
http://www.cannondale.com/support-ebike
note:
Battery temperature is
internally monitored to permit
charging only when battery
ambient temperature ranges
between 0 ° C and 40° C. This
ensures high battery life is achieved.
FAST - 2,5 Hr.
SLOW - 8 Hr.
SCHNELL 2,5 Stunden
LANGSAM 8 Stunden
LENT : 8 heures
RAPIDE : 2,5 heures
LENTO- 8 ore
VELOCE 2.5 ore
BOSCH - 0 275 007 900
