5
127534.PDF
BosCH Drive Unit
see Figure 2.
The BOSCH drive unit (1) is mounted to the frame bottom bracket node (5). Control cables from the HMI unit,
battery, and speed sensor are routed to the unit inside the frame.
Figure 2.
1. BOSCH Drive Unit (removed)
2. Front Chainring
3. Frame Mounting Bolts
4. ISIS Axle end (non-drive side)
5. Frame BB Node
6. Pedal
7. ISIS Crankarm (drive side)
8. ISIS Crankarm Bolt
notICe
Drive unit is maintenance-free and must only be serviced at an authorized service center. This will ensure the quality
and safety of the driving unit. Never attempt to open, remove it from the frame, or work on it yourself.
Other components of the eBike drive (e.g. drive chain, front chain ring, rear cassette, rear derailleur, crankarm)
must be serviced by your Cannondale Dealer. Replacement parts must be identical to the original Cannondale
specification for the bike.
see specifications.
Failure to replace components with original specification can result
in serious overload or other damage to the drive unit.
Unauthorized opening or service of the drive unit will void the warranty.
Please note:
The drive unit utilizes an ISIS standard drive axle. While the ISIS crankarms can be removed a reinstalled following
crankarm manufacturer’s instructions, the ISIS axle itself can not be removed from the BOSCH drive unit. It must be serviced at an
authorized service center.
see also BosCH Instructions
0 275 007 X00
http://www.cannondale.com/support-ebike
