10
sI ConsoLe
???
6 Nm, 53InLbs
4
2
6 Nm, 53InLbs
2
15 Nm, 133InLbs
5
2
5 Nm, 44InLbs
4
2
1.
2.
2.
3.
4.
4
Handlebar Adjustment
The handlebar height is adjusted by loosening the pivot bolt (1) and
moving the arms (2) handlebar up or down to the desired position.
Re-tighten the pivot bolt to the specified torque with a torque wrench
following adjustment. The adjustment bolt is treated with a thread
locking agent, but it will require periodic re-application of Loctite
#242 (blue), especially if frequent adjustments are made.
WARNING
ADJUSTMENTS SHOULD ONLY BE PERFORMED BY A QUALIFIED
BICYCLE MECHANIC.
Head Lamp & Display Mounting
The drive assist system display and head lamp and reflector brackets
are to be mounted onto the center support (3). This support will
rotate so that the mounted parts can be positioned correctly. The
head lamp mounting bracket (4) can also be rotated if necessary.
= Loctite 242 (blue)
2
