8
uSInG the SaG IndICator
The sag indicator is inserted in the left side of the bike in the downtube pivot axle.
1. Set air pressure. See Setting Sag on page 16.
2. Rotate the sag arm to the frame stop, shown above.
3. Sit on saddle, feet on pedals in riding position.
4. Dismount. Check arm travel. If the recommended
sag 33%-40% sag is present the “SAG” bar will be
at the frame stop. See above.
If the arm rotates further beyond the “SAG” mark
toward the “100%” mark, it is telling you that more
than 33-40% sag is present. See above. For more
sag, move down a row in the air pressure chart. For
less sag, move up a row.
The sag indicator assembly can be removed from the
downtube pivot by simply pulling it out.
Less Sag
More Sag
Summary of Contents for Claymore
Page 27: ......
