Cannondale Alloy Road Disc, Quick Start Manual

Page: 12 / 16

Some final pre-ride checks.
Attempt to rotate the handlebar forward and backward in the stem. If
it moves, the stem faceplate bolts are not tight enough. Use the torque
wrench and correct bit to torque the faceplate bolts to specification,
using the same “X” pattern as before.
Brake Check. Confirm the front and rear brakes engage when the
levers are squeezed. The brake lever and handlebar should not come
into contact with the brakes fully engaged.
Wheel Engagement. Verify both thru-axles are tightened securely.
The lever should leave a mark in your hand.
Tire Pressure. Inflate the tires to the manufacturer’s recommended
tire pressure, which is marked on the tire sidewall.
I.
J.
K.
L.
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
I
J
K
L