© 2020
|
Johnson Outdoors Marine Electronics, Inc.
|
cannondownriggers.com
24
INSTALLING THE REAR MOUNT ROD HOLDER
2
#20 X 1
Item(s) needed:
c. A Soft Grip Knob will be used to secure the Dual
Axis Rod Holder Tube to the Arm just installed.
Take one of the Soft Grip Knobs (Item #20) and
one Spring Release (Item #22). Place one spring
on the end of each Soft Grip Knob.
d. Take the Dual Axis Rod Holder Tube (Item #24)
and turn it so that the short end of the piece will
be placed against the Dual Axis Rod Holder Arm.
The face of the Dual Axis Rod Holder Arm that
contains keyed teeth which are matched on the
Dual Axis Rod Holder Tube. These keyed teeth will
help to hold the position of the knob and help to
hold it in place when the position of the holder
is changed during use. Secure the Dual Axis Rod
Holder Tube with the Soft Grip Knob.
e. To adjust the direction of the Dual Axis Rod Holder
Arm or tube, loosen the Soft Grip Knob and rotate
in the desired direction. Then re-tighten the Soft
Grip Knob to secure in place.
#22 x 1
#34 X 1
2c
2e
2d
2c
Soft Grip Knob
Soft Grip Knob
Soft Grip Knob
Soft Grip Knob
Spring Release
Spring Release
Spring Release
Spring Release
Soft Grip
Soft Grip
Knob
Knob
Short End
Short End
Dual Axis
Dual Axis
Rod Holder
Rod Holder
Arm
Arm
Dual
Dual
Axis Rod
Axis Rod
Holder
Holder
Tube
Tube
Dual
Dual
Axis Rod
Axis Rod
Holder
Holder
Tube
Tube
Soft Grip
Soft Grip
Knob
Knob
Soft
Soft
Grip
Grip
Knob
Knob
Dual Axis Rod
Dual Axis Rod
Holder Arm
Holder Arm
