FITMENT OF SPACER BRACKETS AND BLANKET.
FLUE OUTLET
(HEATER SUPPLIED)
OVERALL DIMENSIONS OF THE HEATER CABINET.
(SEE FIG 3 AND 4. )
735mm
FIG 4.
FIG 3.
Page 4.
* WIDTH
735 mm
(INCLUDING SPACERS)
620 mm
380mm
470mm
100mm
CLEARANCE
FROM COMBUSTIBLES
25mm
FLUE SPIGOT
SUPPORT BRACKET
FLUE SPIGOT
MTG BRKT
WHEN FLUE
SPIGOT
ENGAGED
Page 5.
FIXING SCREWS
No8 x 3/8" SELF TAPPING
TOP & SIDE
BRACKETS
FIG 5.
D
IAG
O
N
A
L
C
O
R
N
ER
S
REAR BRACKETS
1. Fit top and side brackets to heater cabinet on diagonal corners
as shown each side. (see Fig 5). Use existing screw positions.
2.
When using twin skin flue (Method A):
3. Remove the flue outlet supplied with heater and replace with
flue outlet supplied with mock kit.
Position insulation blanket on heater top aligned with edges.
Secure with aluminium tape (see Fig 5).
4. Fit rear spacer brackets to heater cabinet on diagonal corners
as shown (see Fig 5). Use existing screw positions.
(SEE FIG 3 AND 4. )
Page 4.
* HEIGHT
620 mm 620mm
(INCLUDING SPACERS)
* WIDTH
735 mm
(INCLUDING SPACERS)
* DEPTH
mm 342 mm
(WHEN FLUE SPIGOT ENGAGED)
387
Page 5.
FIXING SCREWS
No8 x 3/8" SELF TAPPING
TOP & SIDE
BRACKETS
FIG 5.
INSULATION
BLANKET
D
IAG
O
N
A
L
C
O
R
N
ER
S
SECURE INSULATION BLANKET TO TOP OF HEATER
USING ALUMINIUM TAPE
REAR BRACKETS
FITZROY
CANTERBURY
