background image

WARRANTY

THE CANNON  APPLIANCE IS WARRANTED AGAINST DEFECTS 
IN MATERIALS AND WORKMANSHIP FOR A PERIOD OF ONE (1) 
YEAR FROM THE DATE OF ORIGINAL PURCHASE, FOR 
RESIDENTIAL USE IN AUSTRALIA.

WARRANTY SERVICE, WHICH INCLUDES PARTS AND LABOUR 
FOR THE REPLACEMENT OR REPAIR OF DEFECTIVE PARTS, 
IS AVAILABLE THROUGH CANNON AUTHORIZED SERVICE 
AGENCIES.  

CONSUMERS ARE RESPONSIBLE FOR SERVICE PERSON’S
TRAVEL OUTSIDE NORMAL SERVICE AREAS  (APPROXIMATELY 
SEVENTY 70K RADIUS FROM THE NEAREST CANNON DEALER’S 
LOCATION), LOCAL CARTAGE, AND NORMAL MAINTENANCE AS 
DESCRIBED IN THIS MANUAL.

ANY PRODUCT SUBJECTED TO MISUSE, ABUSE, NEGLIGENCE, 
ACCIDENT OR ALTERATION WILL HAVE IT’S WARRANTY VOIDED. 
THE DEFACEMENT OF SERIAL PLATE WILL HAVE IT’S 
WARRANTY VOIDED.

IF INSTALLATION IS NOT CARRIED OUT IN ACCORDANCE WITH 
THE MANUFACTURER’S INSTRUCTIONS, THIS WARRANTY WILL 
BE VOIDED.

THE CUSTOMER MUST KEEP THEIR “TAX INVOICE” AS PROOF 
OF PURCHASE OF THIS PRODUCT AND THE COMPLIANCE 
CERTIFICATE AS PROOF OF REQUIRED INSTALLATION.

MODEL NUMBER:

SERIAL NUMBER:

DATE OF MANUFACTURE:

DATE INSTALLED:

COMPLIANCE CERTIFICATE No:

DESIGNED, MANUFACTURED AND DISTRIBUTED BY:

SAMPFORD AND STAFF PTY LTD
421 SMITH STREET
FITZROY, VIC, 3065
TEL

1300 727 421

DON’T RISK YOUR APPLIANCE WARRANTY

ONLY A LICENSED PERSON WILL GIVE YOU A COMPIANCE
CERTIFICATE, SHOWING THAT THE WORK COMPLIES WITH
ALL THE RELEVANT STANDARDS.

AND ONLY A LICENSED PERSON WILL HAVE INSURANCE
PROTECTING THEIR WORKMANSHIP FOR 6 YEARS.

SO MAKE SURE YOU USE A LICENSED PERSON TO INSTALL
THIS APPLIANCE AND ASK FOR YOUR COMPLIANCE 
CERTIFICATE TO ENSURE THE MANUFACTURERS 
APPLIANCE WARRANTY WILL BE HONOURED.

Page 1.

Page 6.

CLEANING

ALL CLEANING SHOULD BE CARRIED OUT WHEN THE HEATER IS 
COLD.  NORMALLY THE HEATER SHOULD ONLY NEED WIPING WITH 
A LINT FREE DAMP CLOTH.  ANY STUBBORN STAINS CAN BE 
REMOVED WITH A NON-ABRASIVE SPRAY ON CLEANER. IF AN 
ABRASIVE CLEANER IS USED THE PAINT FINISH WILL BE DAMAGED.

INTERNALLY THE HEATER SHOULD ONLY BE CLEANED BY A 
LICENSED SERVICE PERSON LISTED IN THIS MANUAL.

IF YOUR HEATER REQUIRES ATTENTION CONTACT YOUR SUPPLIER 
OR LICENSED SERVICE PERSON LISTED IN THIS MANUAL.

USER INSTRUCTIONS

Summary of Contents for FITZPIBPWR-02-LP













Reviews: