Cannon FITZPIBPWR-02-LP, User Instructions

Page: 7 / 12

SAFETY WARNINGS
PLEASE READ THIS MANUAL BEFORE USING THIS HEATER.
WHAT TO DO IF YOU SMELL GAS.
WARNINGS.
1. TURN OFF THE MAIN GAS SUPPLY.
2. EXTINGUISH ANY OPEN FLAME.
3. OPEN WINDOWS.
4. DO NOT TOUCH ELECTRICAL SWITCHES.
5. DO NOT USE YOUR TELEPHONE.
6. CALL YOUR GAS SUPPLIER IMMEDIATELY FROM YOUR
NEIGHBOUR’S PHONE.
1. IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION,
SERVICE OR MAINTENANCE CAN CAUSE INJURY OR
PROPERTY DAMAGE. REFER TO OTHER SECTIONS OF THIS
MANUAL FOR CORRECT PROCEDURES, OR CONSULT WITH
PLACE OF PURCHASE, A LICENSED PLUMBER, A GAS
SUPPLIER OR SERVICE AGENT.
2. DUE TO HIGH TEMPERATURES, THE ROOM HEATER SHOULD
BE LOCATED OUT OF TRAFFIC AND AWAY FROM:
FURNITURE.
COMBUSTIBLE MATERIALS.
GASOLINE AND OTHER FLAMMABLE LIQUIDS.
DO NOT PLACE CLOTHING OR OTHER FLAMMABLE MATERIAL
ON OR NEAR THE HEATER.
3. KEEP CURTAINS *, CLOTHING, FURNITURE AND OTHER
FLAMMABLE MATERIALS AT LEAST 900mm FROM THE FRONT
AND SIDES OF THE HEATER.
* AT THE OWNER’S DISCRETION CURTAIN CLEARANCES CAN
BE LESS THAN 900mm AS LONG AS THEY ARE RESTRAINED
FROM THE FRONT, TOP AND SIDES OF THE HEATER.
THE MANUFACTURER TAKES NO RESPONSIBILITY IF
CURTAIN CLEARANCE IS LESS THAN 900mm AND NOT
RESTRAINED.
4. CHILDREN AND ADULTS SHOULD BE ALERTED TO THE
HAZARDS OF HIGH SURFACE TEMPERATURE AND SHOULD
TAKE CARE TO AVOID BURNS OR CLOTHING IGNITION.
THIS HEATER IS NOT INTENDED FOR USE BY YOUNG
CHILDREN OR INFIRM PERSONS WITHOUT SUPERVISION.
YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED
WHEN THEY ARE IN THE SAME ROOM AS THE HEATER.
YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE
THAT THEY DO NOT PLAY WITH THE HEATER.
Page 3.
USER INSTRUCTIONS
OPERATING INSTRUCTIONS. 1. PLUG THE POWER CORD INTO THE WALL SOCKET AND TURN ON
THE POWER TO THE HEATER,
SEE FIG 1.
REFRAIN FROM USING AN EXTENSION CORD.
2. FOR CONTROL LAYOUT REFER TO FIG 2.
BURNER LOW
POWER OFF
SWITCH 4
BURNER HIGH
SWITCH 3
FAN LOW / POWER ON
SWITCH 2
FAN MED
SWITCH 1
FAN HIGH
3. TO TURN HEATER ON PRESS SWITCH TO POWER ON POSITION.
THERE IS A 30 SECOND DELAY BEFORE THE BURNER IGNITES.
THIS DELAY IS TO ALLOW THE IGNITION SEQUENCE TO TAKE
EFFECT. AT THIS SETTING THE BURNER IS ON
LOW .
THE BURNER WILL IGNITE ON BOTH HIGH AND LOW SETTINGS.
REFER FIG 3.
4. TO TURN BURNER TO HIGH SETTING, PRESS SWITCH FOR HIGH
SETTING. REFER FIG 4.
5. TO INCREASE THE FAN SPEED TO MED , PRESS SWITCH FOR MED
SETTING. REFER FIG 5.
FIG 1.
FIG 2.
FIG 3.
FIG 4.
FIG 5.
Page 4.