Installation
TERMINATING THE DOWNRIGGER CABLE
........................................................................................................................................................................
TIP: Use only straight cable when routing thru the terminator. Worn or kinked cable can be stressed
and may break prematurely when retrieving trolling weights.
ATTACHING THE LINE RELEASE (UNI-RELEASE)
........................................................................................................................................................................
The Cannon Uni-Release attaches directly to the
downrigger weight. Attach fi shing line to the clip
at the end of the release, and then click through a
series of increasing tension settings. The release
can be used with any test line on salt or fresh water
and may be adjusted from 2 to 22 pounds of grip
tension on the line.
To change line release tension, turn tension knob
to (+) to increase or (-) to decrease. Tension also
may vary according to where the line is placed in
the grips. Higher tension is on the line if it is set
back toward the hinge, and lower if set closer to the
opening. To open the release, spread the release
arms with thumb and forefi nger applying pressure
to the sides.
