7
www.cannondownriggers.com
Installation
Decks thinner than 1/4”
Use a Cannon deck plate (PN 2200693) to prevent
defl ection and add stability to decks thinner than 1/4”.
Use the deck plate as a template to mark the hole loca-
tions.
If access to the underside of the deck is not avail-
able, the deck plate can be mounted using screws and
wellnuts. Use the deck plate as a template to mark loca-
tions and drill 4 wellnut clearance holes. Use four 1/4-20
x 1-1/2” fl at head screws and four wellnuts to mount
deck plate. Tighten the screws so the wellnuts are fi rmly
compressed.
Where the underside is accessible, the deck plate
can be mounted using screws, nuts, and washers. Drill
9/32” holes. Use four 1/4-20 x 1-1/2” fl at head screws,
nuts and washers (fl at and lock). Fasten plate to deck.
To secure the mounting base to the deckplate use four
1/4-20 x 1” truss head screws.
NOTE: When using the telescopic boom, we strong-
ly recommend the use of a deck plate on all boats to
provide adequate stability for the downrigger.
The Low-Profi le Swivel Base mounting follows the same
procedure as for the deck plate except that four 1/4”-
20 x 1-1/2” truss head screws are used to fasten the
mounting base and four additional 1/4”-20 x 2” truss
head screws fi x the swivel base to the boat deck.
Low-Profi le Swivel Base
AnglingOutpost.com
1-888-356-5022
AnglingOutpost.com
1-888-356-5022
