13
www.cannondownriggers.com
Installation
TERMINATING THE DOWNRIGGER CABLE
TIP: Use only straight cable when routing through the terminator. Worn or kinked cable can be
stressed and may break prematurely when retrieving trolling weights.
ATTACHING THE LINE RELEASE (UNI-RELEASE)
The Cannon Uni-Release attaches directly to the down-
rigger weight. Attach fi shing line to the clip at the end of
the release, and then click through a series of increas-
ing tension settings. The release can be used with any
test line on salt or fresh water and may be adjusted from
2 to 22 pounds of grip tension on the line.
To change line release tension, turn tension knob to (+)
to increase or (-) to decrease. Tension also may vary
according to where the line is placed in the grips. Higher
tension is on the line if it is set back toward the hinge,
and lower if set closer to the opening. To open the re-
lease, spread the release arms with thumb and forefi n-
ger applying pressure to the sides.
AnglingOutpost.com
1-888-356-5022
AnglingOutpost.com
1-888-356-5022
