CANNON Instrument Company® | Getting Started
17
Adjust the Default Wash Settings (
CAV 4.2 GUI
)
Verify and adjust the default wash settings before running a wash for the first time.
Note:
The CAV 4.2 wash settings are defined in the method settings of the
last run test. When you start the CAV 4.2 from a complete
shutdown, it has no knowledge of the last run test and uses the
default wash settings.
1.
From the main screen, swipe the screen with left or right to move to the appropriate bath screen.
2.
On the bath screen, click the
Settings
button. The settings menu opens.
3.
Click
Default Wash
. The
Wash
screen opens. See Figure 13.
Figure 13 — Settings Menu and Wash Screen
4.
Verify and adjust the wash values as necessary. To change the wash value, you must be logged onto
the CAV 4.2 with appropriate privileges.
5.
Click
Save
when you are done adjusting the settings.
6.
Click
Back
to return to the bath screen.
7.
Repeat steps 1 through 6 for the second bath.
Run a Wash (
CAV 4.2 GUI
)
Wash solvent through the CAV 4.2 prior to training sensors or running a test. See Table 12 for tools and
materials needed.
Table 12 — Tools and Materials Required to Run a Wash
Description
Assembled CAV 4.2
Sample vials
