69
EN
This button can be used to select
three
different functions,
depending on the
selected programme
:
- STAIN LEVEL button
Once the programme has been selected
the wash time set for that programme will
be automatically shown.
This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled
(can
only be used on some programmes as
shown in the table of programmes)
.
- ALTERNATIVE PROGRAMME
SELECTION
Where shown in the table, this option
permits selection of an alternative to the
pre-set programme (in the case of the
RAPID (14'/30'/44')
programme, it allows
you to choose one of the three available
durations).
- STEAM LEVEL
After selecting the
EASY IRON PLUS
programme, you can use this button to
choose between three steam treatments of
different intensities, designed for dry or wet
garments and depending on the type of
fabric:
- COTTON (default selection)
This programme is used for cotton
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- SYNTHETIC (press button once)
This programme is used for synthetic
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- DELICATES (press button twice)
With the help of steam, the cycle
refreshes and relaxes creases in
garments after use. The programme
consists of an initial phase in which the
steam acts and a final phase in which
the excess humidity is removed for
immediate use. The cycle is suitable for
dry fabrics.
This button allows you to change the
temperature of the wash cycles.
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.
If you want carry out a cold wash all the
indicators must be off.
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
SPIN SELECTION button
TEMPERATURE SELECTION
button
STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION/
STEAM LEVEL
button
If an option is selected that is not
compatible with the selected
programme then the option indicator
light first flashes and then goes off.
