EN 11
Hinges which ensure an automatic soft and
smooth movement during the closing phase of
the oven door.
Two guide rails which facilitate the cooking
status check as they allow easily the extraction
and repositioning of trays and grids inside the
oven cavity.
Telescopic guides
(only if present)
Softclose
(only if present)
Heat Feel Sensor
(only if present)
HEAT FEEL SENSOR
• Before the use verify the charge of the Heat
Feel Sensor:
1.Put Heat Feel Sensor into the charger and
close the cover.
performance, more even cooking of food at
all temperatures, shorter cooking times and,
lastly, an even temperature distribution inside
the oven.
Measures the internal temperature of food
during cooking. Insert into the hole on the top
of the cavity. Should be inserted while oven is
cool.
2.Connect the charger to a USB power source,
such as USB adapter or USB socket of PC/
notebook with the USB cable. The charger
may not be working properly with power bank
because of its auto switch-off function.
3.LED of the charger will turn on and is flashing
during charging. It will turn off when Heat Feel
Sensor is fully charged.
• Verify that Bluetooth of the oven is turned on.
• Make sure the Heat Feel Sensor is within
the range of monitoring distance. With long
distances the Heat Feel Sensor cannot be
detected by the oven.
• If the Heat Feel Sensor is covered by an
insulated material doses not communicate
with the oven. If the probe is disconnected
while standard cooking using the probe is
underway (flat battery, Bluetooth turned off,
etc.…), the cooking process will be interrupted
after a brief interval. During cooking with recipe
and probe, the cooking process continues for
the remaining scheduled time if disconnected.
Summary of Contents for FCT858 XRWF
Page 180: ...70030734 Rev_0 04 2023...
