5
5) If the glass canopy has not been
pre-assembled by the factory, then it
should be fixed to the top of the main
body of the cooker hood at this stage.
6) Lift the main body of the cooker
hood onto the angle bar and then fix it
into position using the 16 x M5 screws.
IMPORTANT: This stage of the
installation process MUST be
completed by two people.
IMPORTANT: The 16 x M5 screws
MUST be securely tightened.
7) If you are going to be using the
hood in
extraction mode, you should fix the
ducting
hose to the spigot.
The electrical connection must correspond to the electrical
repuirement noted on the rating plate, which is placed inside the
cooker hood. The appliance should now be connected to the
electrical supply.
Check that the appliance is operating correctly by selecting each speed
and switching the light bulbs on and off.
Remove the hanging hook and then slide the lower chimney section
downwards, until it rests against the main body of the cooker hood.
Use a stainless steel cleaner and polish on the stainless steel sections of
the appliance.
If you are using the appliance in recirculation mode, then you
should now fit the carbon filter.
Summary of Contents for CVMI900X
Page 29: ...28 ...
