Candy CMDN 182 EU, User Manual

Page: 30 / 120

29
Current function
Function to set
Refer to ‘Single key operation’;
When the ‘ Eco ’ function is enabled, the ‘Holiday’ or
‘Fridge Off’ function gets exited.
3) When the ‘Holiday’ function is enabled, the fridge
temperature is set at 14 ℃ , which can’t be
modified.
4) When the ‘Holiday’ function is exited, the fridge
temperature is restored to its original value that is
set before the ‘Holiday’ function is enabled.
1.4.3 ‘ Eco ’ function
1) To enter ‘ Eco ’:
Refer to ‘Single key operation’;
2) To exit ‘ Eco ’ (the follows r efer to the OR
relationship):
Refer to ‘Single key operation’;
When the ‘Quick Freeze’ or ‘Holiday’ function is
enabled, the ‘ Eco ’ function gets exited.
When the fridge temperature or the freezer
temperature is modified, the ‘ Eco ’ function gets
exited, with the set temperature executed.
3) When the ‘ Eco ’ function is enabled, the fridge
temperature is set at 05 ℃ and the freezer
temperature at -18
℃
.
4) When the ‘ Eco ’ function is disabled, the
temperature of each compartment is restored to
its original value that is
set before the ‘ Eco ’
function is enabled.
1.4.4 ‘Fridge Off’ function
1) To enter ‘Fridge Off’:
In the case of fridge temperature setup, the fridge is
shut off when the ‘OK’ key is pressed after the
temperature setting is adjusted to ‘OF’.
2) To exit ‘Fridge Off’ (the follows refer to the OR
relationship):
Refer to ‘Single key operation’; Adjust the fridge
temperature to the mode other than OF, and then
press the ‘OK’ to validate it.
When the ‘ Eco ’ function or the ‘Holiday’ function is
enabled, the ‘Fridge Off’ f unction gets exited.
1.4.5 Function program setting relationships table
Quick
freeze
Eco Holiday
Quick freeze Out Or And
Eco
Or Out Or
Holiday And Or Out
Note:
1.
‘Out’: indicates that the current function will be
exited.
2. ‘Or’: indicates that the current function will be
disabled when the function to set is enabled.
3. ‘And’: indicates the function to set can not be
enabled with the current function still running,
and the two function can be executed at the same
time after setting.
2. Display
2.1 Display Rules
2.1.1 Characters and icons that can be displayed
independently: Fridge icon, freezer icon, Pure Tech
Light and its icon, Quick Freeze and its icon, Holiday
and its icon, Eco and its icon, minus sign,
℃
symbol,
and two 8-bit digits.
2.1.2 The display gets all illuminated when the
refrigerator is energized for the first time, which
restores to the normal display2S later.
2.1.3 When the display gets illuminated,it will be off if
no key operation within 3 minutes, with keys locked.
2.1.4 When the display is off, a key can be awakened
when pressed for the first time, and if any key is
pressed at this time, this key becomes invalid; In such
case, hold down the ‘Unlock’ key for 3s to unlock the
key, and then press the key to enable its function.
2.1.5 In the case of failure or any door open action,
the display gets illuminated.
2.1.6 Over-temperature alarm:
When energized, if the freezer sensor temperature is
higher than -10
℃
, its corresponding icon (the upper
and lower freezer doors) and set temperaturegets
flickering. The temperature of the freezer when it is
energized can be displayed by pressing any key. And
the normal display is restored by pressing any key
again.
2.1.7 Special function program display contents:
Under the state that the display i
s on, when the ‘Pure
Tech Light ’ function is enabled, the character ‘’Pure
Tech Light ’ gets illuminated; when the ‘Quick Freeze’
function is enabled, the character ‘Quick Freeze’gets
illuminated; when the ‘Holiday’ function is enabled,
the character ‘’Holiday’gets illuminated; and when
the ‘
Eco ’ function is enabled, the character ‘ Eco ’gets
illuminated.
2.1.8 Failure indications
1) Failure information displayed for different types of
failures :
2) In case ‘E0’ and ‘E1’ alarm information need to be
displayed at the same time, ‘E2’ is displayed.
3) Normal operation can be restored immediately
after a failure is troubleshooted, without any
manual intervention.
3. Special Programs
3.1 Maintenance program
3.1.1 By pressing combination keys, you can access
the maintenance program (refer to the section
Keys ),
with the buzzer issuing one sound first. And all
S/N Failure Types
Item
Information
Displayed
1 Fridge sensor
failure
Fridge
temperature
display as ‘E0’
2 Freezer sensor
failure
Freezer
temperature
display as ‘E0’
3 Freezer evaporator
sensor failure Freezer
temperature
display as ‘E1’
4 Ambient
temperature
sensor failure Display as ‘EH’
5 Communication
failure Disp lay as ‘EC’
6 Fan alarm Display as ‘EF’