Candy CMCH 100 D, Instruction Manual

Page: 6 / 117

temperature is set at - 12
℃
, it will be adjusted to 2
℃
after you press the "+" key; and if the temperature is set
at 8
℃
, it will be adjusted to -24
℃
after you press the "+" key.
★
Fridge temperature setting
You can adjust the temperature value by pressing the "+" / "-" key. When the "+" / "-" key is pressed for the first
time, the temperature value is subject to change; and when the "+" / "-" key is pressed again, the set
temperature is increased/decreased by 1
℃
accordingly. When the temperature range is set to be 8
℃
~2
℃
, the
fridge mode is enabled.
★
Freezer temperature setting
You can adjust the temperature value by pressing the "+" / "-" key. When the "+" / "-" key is pressed for the first
time, the temperature value is subject to change; and when the "+" / "-" key is pressed again, the set
temperature is increased/decreased by 1
℃
accordingly. When the temperature range is set to be -12
℃
~-24
℃
,
the freezer mode is enabled.
★
Fast Freeze
When the “Fast Freeze” function is activated, the freezer temperature is automatically set at -32
℃
, and after
running for 26 hours, the Fast Freeze function will get exited. Cooling down the freezer temperature in a rapid
manner is beneficial to the prevention of food nutrition against loss and the preservation of freshness.
1
）
When the “Fast Freeze” function is active, the temperature is displayed to be "- 32
℃
", which is subject
to no change.
2
）
To enter or exit the Fast Freeze function
When keys are unlocked, you can hold down the “+” key for 3s to enter or exit the “Fast Freeze” function.
Note: If the freezer temperature is set below zero (i.e., at the freezer mode) before the fast-freeze function is
enabled, it will restore to the set temperature after the “Fast Freeze” function exits; and if the freezer temperature
is set above zero (i.e., at the fridge mode) before the fast-freeze function is enable, it will return to -18
℃
by
default after the “Fast Freeze” function exits.
★
Child Lock
1
）
When the “Child Lock” function is enabled, the temperature and function cannot be set, in order to prevent
misoperation.
2
）
To enter the “Child Lock” function:
If no key operation within 3 minutes, the freezer “Child Lock” function will be enabled automatically.
3
）
To exit the “Child Lock” function:
You can hold the “-” key for 3s to exit the “Child Lock” function.
★ Power cut memory
In case of power failure, the freezer will maintain the operating state before power failure when power supply is
restored.
★ Power-on delay protection
In order to protect the refrigerator compressor from being damaged in the case of short-time power failur e (i.e.
, less than 5 minutes), the compressor will not be started immediately after it is powered on.
★ Fault alarm
In case E0 is displayed on the operation panel, it indicates fault with the freezer. Please contact the aftersales
person for visiting service in such case.