EN-13
3.
Turn the whole cooktop off by touching the ON/OFF control.
4.
Beware of hot surfaces
‘H’ will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
In case of a power interruption while "H" is on, please pay attention to not touch
the cooking surface even if "H" is no longer shown when the power is back.
Using the Power Management
Using power management you can set the total power to 2.5kW/ 3.0kW/ 4.5kW/
6.5kW and 7.4kW. The default total power setting is the maximum power level.
Setting the total power level to fit your requirement
1.
Make sure the cooktop is turned off.
Note: you can only set power management when the cooktop is turned off.
2.
Touch the button “Pause function” and hold for 5 seconds.
You can hear the buzzer beeps one time.
3.
After you hear the beep, touch “+” and “-” button at the same
time and hold for 3 second, the timer indicator will show flashing previous total
power level, e.g. ‘2.5’. Touch and hold ” +” and ”-” for 1 second again to switch to
other power level, for example 3.0. When the power that you want is flashing,
touch the button “Pause function” and hold for 5 seconds. The buzzer will beep 10
times. It means you have finished the setting.
Note:
1.
After step 2, you must touch the “+” and “-”
within 3 seconds
after you hear
the beep. Otherwise you will need to start again from step 2.
EN-14
2.
Once finish setting, wait till the end of 10 beeps. Do not touch any button during
this period. Otherwise the setting will be invalid.
Power management Rules
If total power exceeds the limitation of 2.5kw, 3.0kw, 4.5kw, 6.5kw,7.4W
(depending on which level you’ve set), you are not able to increase power stage
of any zone. If you increase it, the cooktop will beep 3 times and indicator will
show a flashing ‘Pn’. Thus you need to decrease power stage of other zones
before increasing the power of objective zone.
Power Limitation in centre and right zones
•
Cooking zones are divided into two groups. Each group has a maximum
electricity loading of 3600 W.
•
The limitation decreases the power to the other cooking zones.
•
The heat setting display of the reduced zones changes between two levels.
e. g. if all zones are on, the biggest power level of three zones are decrease to
7-level, 7-level, 7-level.
In Group a both two zones can work at level 9 at the same time because they
are 3500 W in total.
In Group b if 3 zones are working, the max power level which each zone can
reach is 7. If the rear zone of the Group b is turned off, the other two zones can
reach at maximum power level 8.
If you want one of the zone of Group b works at the highest power level, only 2
zones should be tuned on. The hob automatically reduces the power of the first
zone you turned on.
Summary of Contents for CIES55MCTT/1
