-
Do not use flamable or alcoholic cleaners
Enamelled parts:
All enamelled parts should be cleaned with a sponge and soapy water or specific detergents.
Never use abrasive cleaning products. Dry thoroughly after cleaning.
Stainless steel top:
The stainless steel top should be cleaned with a damp cloth and proprietary detergents
commercially available. After rinsing, dry preferably with a chamois leather.
Grids:
The enamelled panstand grids of the cooktop are dishwasher safe.
Stainless steel panstand grids may take on a bluish tinge on parts around the burners as a result of
the high temperatures. This effect can be reduced by using commercially available steel wool pads.
Burners:
The burners, comprising two parts, can be removed and cleaned using suitable detergents.
After cleaning, dry the burners thoroughly and reposition them carefully in their seats.
In models with electric ignition, always check that the electrode “E” (fig.11) is clean.
In models with safety device, clean the probe “T” (fig.11) in order to allow regular operation of the
safety valve. Both the electrode and probe must be cleaned with care.
Upon completion of cleaning, replace the burners accurately in their seats.
To prevent damaging the electric ignition, avoid using it when the burners are not in place.
Electric hotplates:
The electric hotplates should be cleaned when they are only slightly warm.
Clean with a damp cloth, then finish off with a cloth dampened with mineral oil.
In the glass-ceramic hobs never use abrasive cleaners, could damage the glass surface.
Use only neutral and not-flammabke detergents.
Ceramic hob
The electric plates must be cleaned when they are just slightly warm. Clean with a damp rag and
finish with a "scraper" (optional).
Maintenance
The appliances do not require any particular maintenance, nonetheless it is advisable to have them
checked at least once every two years.
If the knobs become difficult to turn, or if there is a smell of gas, shut the gas supply tap and call
After-sales service. Faulty taps must be replaced along with their gasket.
Glass lid
If the hob has a glass lid, the following precautions must be adopted:
-
Never place hot pans on the lid when closed.
-
Remove any liquid spills before opening the lid.
-
The lid may break if heated;
Turn off all burners and electric plates and wait for them to cool before closing it.
After-sales service
Before calling in the After-Sales Service
If the hob fails to operate, we advise you to:
-
Check that the plug is correctly inserted into the power socket.
-
Check that the flow of gas is normal
If you are unable to find the cause of the problem;
switch the appliance off, do not tamper with it and call in the After-Sales Service.
