C&T PC311E, User Manual

Page: 48 / 73

PC300 / PC311E(P) l User’s Manual
48
4.1 BIOS Introduction
The system BIOS software is stored on EEPROM. The BIOS provides an interface to modify the
configuration. When the battery is removed, all the parameters will be reset.
BIOS Setup
Power on the embedded system and by pressing <Del> or <F2> immediately allows you to enter the
setup screens. If the message disappears before you respond and you still wish to enter the Setup,
restart the system by turning it OFF and ON or pressing the RESET button.
You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Main Setup
The main menu lists the setup functions you can make changes to. You can use the arrow keys ( ↑↓ )
to select the item. The on-line description of the highlighted setup function is displayed at the
bottom of the screen.
General Help <F1>
The BIOS setup program provides a General Help screen. You can call up this screen from any menu
by simply pressing <F1>. The Help screen lists the appropriate keys to use and the possible selections
for the highlighted item. Press <Esc> to exit the Help screen.
Chapter 4: BIOS Setup
Control Keys
<←> <→> Select Screen
<↑> <↓> Select Item
<Enter> Select
<Page Up/+> Increases the numeric value or makes changes
<Page Down/-> Decreases the numeric value or makes changes
<F1> General Help
<F2> Previous Value
<F3> Load Optimized Defaults
<F4> Save Configuration and Exit
<Tab> Select Setup Fields
<Esc> Exit BIOS Setup