8
21.
he lights’ power supply is now
22.
These connectors can only be
23.
You can now close the lids.
24.
Position the light so the wires are lined up with the small cavities in the
25.
At this step, you must open the control box by unscrewing the 6 screws
T
complete. You must now link the lights
between each other so the communication
can be made between them and the
control box. Take the white wire of the
control box that should normally already
be linked to it and connect it to the first
light of the series.
connected in one way. The only thing
you now need to do is link the lights
together using the white wires.
service base to avoid them being crushed when the lid is put in place.
that are on top.
