III)
DOCK BOX INSTALLATION
The Dock Box comes with fixation pin and hardware in order to fix the Dock
Box to the Candock docks.
With a Candock key, remove a pin of
your Candock dock where you want to
position the Dock Box and replace it by
the fixation pin.
Pass the rod of the pin through the
center hole of the Dock Box, place hardware
(nut and washer) and tighten everything to
ensure a good fixation of the Dock Box to
the Candock dock.
The pipe coming out the Dock Box should
ideally point towards the rear of your
Candock dock, where you will install the
airbag.
Now, the Dock Box is installed on the Candock dock and is not able to fall in
the water.
It is possible to position the Dock Box on the shore or on another floating
surface along the Candock dock, but Candock disclaims any responsibility
for the quality of the fixation of the Dock Box on this area.
