![background image](http://html1.mh-extra.com/html/candk-systems/system-238/system-238_user-manual_3074925028.webp)
28
Enter the new PIN again and push
the # key.
#
Exit the programming mode by pushing the
key, then the # key.
Make sure the new PIN works.
After leaving the programming mode, Arm and Disarm your system to ensure that the
new PIN functions properly.
#
*
*
If the new PIN is accepted, the keypad will beep twice. If you make a mistake while
programming, or if the system rejects the new PIN, the keypad will beep five times.