1 5
.
To bypass more than one zone:
enter your
PIN (if required), push the key, enter the
first zone to be bypassed, push the key
again, enter the next zone to be bypassed,
and so on. When the last zone to be bypassed
has been entered, push the # key.
PIN
REQUIRED
To indicate that zones have been bypassed, the READY light and the ZONE light will
flash slowly. The red ZONE lights of all bypassed zones will flash to remind you that
bypassed zones are not protected
.
.
.
The procedures for adding a bypass and removing a bypass are identical
. To
remove a bypass: enter your PIN, push the key, enter the zone from which the
bypass is to be removed, then push the # key.
NOTE: Disarming your alarm system
REMOVES
all bypasses (except 24-hour
zones).
When you have finished bypassing zones, arm the system by entering your PIN and
pushing the # key.
.
ZONE #
ZONE #
#
