C&K systems SYS3316RF, Installation Instructions Manual

Page: 14 / 30

14 14
14 14
14
SYS3316RF Installation Manual
Command Location 27: Soft Zone A (Emergency) Command Location 27: Soft Zone A (Emergency)
Command Location 27: Soft Zone A (Emergency) Command Location 27: Soft Zone A (Emergency) Command Location 27: Soft Zone A (Emergency)
(1) (2) (3) (4)
0 0 1 3
Default Values Default Values Default Values Default Values Default Values
2 2 2 2 2 7 7 7 7 7
#
Digit Positions (1) and (2): Emergency Report Code Digit Positions (1) and (2): Emergency Report Code Digit Positions (1) and (2): Emergency Report Code Digit Positions (1) and (2): Emergency Report Code Digit Positions (1) and (2): Emergency Report Code
Program 00 to disable alarm reporting for Emergency zone.
Digit Position (3): Emergency Zone Receiver Select Digit Position (3): Emergency Zone Receiver Select Digit Position (3): Emergency Zone Receiver Select Digit Position (3): Emergency Zone Receiver Select Digit Position (3): Emergency Zone Receiver Select
0 = Receiver 1 with Receiver 2 as back-up
1 = Receiver 1 only
2 = Receiver 2 only
3 = Receiver 1 and Receiver 2 (Dual Reporting)
Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type
1 = Pulsing
2 = Steady
3 = Chirp
4 = Silent
Command Location 28: Soft Zone B (Fire) Command Location 28: Soft Zone B (Fire)
Command Location 28: Soft Zone B (Fire) Command Location 28: Soft Zone B (Fire) Command Location 28: Soft Zone B (Fire)
(1) (2) (3) (4)
0 0 1 1
Default Values Default Values Default Values Default Values Default Values
2 2 2 2 2 8 8 8 8 8
#
Digit Positions (1) and (2): Fire Report Code Digit Positions (1) and (2): Fire Report Code Digit Positions (1) and (2): Fire Report Code Digit Positions (1) and (2): Fire Report Code Digit Positions (1) and (2): Fire Report Code
Digit Position (3): Fire Receiver Select Digit Position (3): Fire Receiver Select Digit Position (3): Fire Receiver Select Digit Position (3): Fire Receiver Select Digit Position (3): Fire Receiver Select
Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type
A
B
C
D
E
F
Hexadecimal Value Hexadecimal Value
Hexadecimal Value Hexadecimal Value
Hexadecimal Value
Key Strokes Key Strokes Key Strokes Key Strokes Key Strokes
0
1
2
3
4
5
PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS
PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS
CL 27 - 29 CL 27 - 29
CL 27 - 29 CL 27 - 29 CL 27 - 29
NOTE: Command Location 2F Digit Position (4) must
be programmed to YES to enable Soft Zones.
Command Location 29: Soft Zone C (Police) Command Location 29: Soft Zone C (Police)
Command Location 29: Soft Zone C (Police) Command Location 29: Soft Zone C (Police) Command Location 29: Soft Zone C (Police)
(1) (2) (3) (4)
0 0 1 2
Default Values Default Values Default Values Default Values Default Values
2 2
2 2
2 9 9
9 9
9
#
Digit Positions (1) and (2): Police Report Code Digit Positions (1) and (2): Police Report Code Digit Positions (1) and (2): Police Report Code Digit Positions (1) and (2): Police Report Code Digit Positions (1) and (2): Police Report Code
Digit Position (3): Police Zone Receiver Select Digit Position (3): Police Zone Receiver Select
Digit Position (3): Police Zone Receiver Select Digit Position (3): Police Zone Receiver Select Digit Position (3): Police Zone Receiver Select
Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type Digit Position (4): Loop Bell Type
Refer to CL 27 for information
about programming this zone.
Refer to CL 27 for information
about programming this zone.
This Zone is identified by the "E" key
on the Alpha II and LED keypads.
This Zone is identified by the "F" key
on the Alpha II and LED keypads.
This Zone is identified by the "P" key
on the Alpha II and LED keypads.