Operation of wireless remote control
Changing batteries and notices
1.
Slightly to press the place
to take out the back cover of wireless
remote control.(As shown in figure)
2.
Take out the old batteries. (As show in figure)
3.
Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
(As show in figure)
4.
Attach the back cover of wireless remote control. (As show in figure)
★
NOTE:
Fig.1
●
When changing the batteries, do not use the old or different batteries,
otherwise, it can cause the malfunction of the wireless remote control.
If the wireless remote control will not be used for a long time, please
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets.
If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
●
●
●
●
Fig.2
Emergency operation
If the wireless remote control is lostor broken, please use the
manual switch button. At this time, the unit will run at the Auto
mode, but the temperature and fan speed cannot be changed.
The operation was shown as below:
To open the panel, the manual switch is on the displayer box.
● Turn on the unit: At unit turned off, press the button, the unit
will run at Auto mode immediately.The microcomputer will
accord to the indoor temperature to select (Cooling, Heating,
Fan) and obtain thecomfortable effect.
● Turn off the unit: At unit turned on, press the button, the unit
will stop working.
Manual switch
Fig.3
9
