background image

84

85

Maintenance

Maintenance

Checking the high-voltage battery state of charge

Before winterization and spring recommissioning, check the state of charge status of the high 

voltage battery. The state of charge value during winterization should be 50-60 %.

1.  Turn on the 12V battery switch.
2.  Turn the key.
3.  Check that the SOC status in the user interface is between 50-60%.
4.  If the SOC status is below this value, charge the boat. 
5.  Turn off the key.
6.  Turn off the 12V battery switch.

Checking the 12V battery

1.  Open the sunbed hatch and remove the stowage bag.
2.  Locate the 12V battery and check:

•  For wear or tear on the cables and battery. 
•  That the cables are secured to the battery.
•  That the battery and cable connections are clean and free from corrosion.

Checking the function of the rudder and the struts

NOTICE! Risk of property damage. Make  sure  you  have  an  obstacle  free  space  of                                                                            

2m below the hull when extracting the rudder and struts.

1.  Turn on the key.
2.  Select Retraction settings in the user interface and select a new retraction mode.
3.  Check that the rudder and struts reach locked postion in the new retraction mode.
4.  Repeat the procedure for all retraction modes.

Checking the steering

1.  Turn on the key.
2.  Turn the steering wheel. Check that the rudder is moving accordingly.

Adding corrosion protection on non-stainless steel metal parts

For more information, please contact Candela.

Ensuring a smooth surface of the foil system and pod 

Candela recommends preparing a surface finish of the foil system annually.

The foil system requires low drag for maximum performance. Algae growth or wear and tear can 

increase drag greatly, decreasing propulsion efficiency by 30-40%.

Advice for keeping the surface of the foil system smooth: 

•  Apply Harbor mode when docked. 
•  Remove any seaweed from the foils immediately after applying Harbor mode.
•  Use a boat lift when docked. 
•  Clean the foil system regularly. 
•  Have the foil system serviced to reduce the effects of wear and tear.

Cleaning the deck and cabin

Use a medium-bristled brush, warm water, and an all-purpose, mild cleaner or washing-up liquid. 

The deck manufacturer recommends Dek Magic. Do not use a high pressure washer.

Cleaning the foil system

1.  Scrub the rudder, struts, foil, and pod with a hard brush. If necessary, use a non-abrasive 

detergent.

2.  Continue until the surface is smooth. 

Summary of Contents for C-8 2023
























































Reviews: