CandCNC RC-400, User Manual, Page: 9 / 51

9. In the ADD NETWORK enter the SSID Name into the Network Name box. Use the
EXACT letters and numbers with CAPS if listed that way.
Enter the PASSWORD from the back of the router (AKA ID #) into the SECURITY box.
Hit SAVE to save the setting.
Go back to the WIFI and make sure the tablet connects to the WIFI router. If it does not, go
back though the steps again and make sure the router is showing its ACTIVE and that you
have the INTERNET and WIFI enabled on the tablet.
10. NOW, once you get the tablet connected to the WIFI Router, turn on the
CommandCNC™ PC. The WIFI will be activated unless you bought the unit prior to the
release of the RC400 tablet. You may need to perform setting up the WIFI on the PC (top of
the page wireless icon) and do the same SSID and Password steps to get it to connect. The
name of the Router will show up when you click the Wireless ICON on the PC.
THAT’S IT! Once you have both devices talking to the same Router via wireless (WIFI), they
can talk to each other. You can skip the USING EXISTING NETWORK Section and go to the
Getting connection between RC-400 Wireless Tablet and CommandCNC
PC:
9
SSID and
Password