CandCNC RC-400, User Manual, Page: 7 / 51

The Quick and Easy Three Device WIFI Setup
If all you want is to setup an RC-400 Wireless Tablet, a WIFI ROUTER and the PC running
CommandCNC™, then follow these simple steps.
1. Purchase a new WIFI router or a refurbished router that has been reset to factory defaults.
Buy the least expensive WIFI router with a built in Ethernet hub (about $40.00 or less).
2. Turn the router over and find the router SSID (name) and the Password (ID) and write
them down or take a close up photo with your phone.
3. Plug the Router in and find the power button and turn it ON (usually a push button or
rocker switch in the back). It will “Boot” and the WIFI light will come on steady.
4. Get the
RC400 Wireless tablet and make sure its charged and start it by holding down
the control button (most tablets have three buttons: UP and DOWN Volume are together and
the third is the Control button.) You use it to START, turn off the screen, and shutdown the
tablet, Hold it down to “boot” (Start) the OS and get the menu and icons. You may need to
use a finger “swipe” up to get to the starting menu.
5. Find the SETTINGS ICON (GEAR) and select it.
7