Canature WaterGroup 85UF/DF, Owner'S Manual

Page: 25 / 36

24 25
CODE: 1 00
SALT SETTING
IRON & MN
IRON & MN
2100 GRAINS
LOCK VALUE
LOCK
3. Press & hold button four (4) . Press
button three (3)
to enter code
100
.
Press button two (2) , three (3) times
in a row to accept the code.
4.
Press and hold
button three (3)
and
four (4) until you hear a beep.
5.
Press button two (2) until you get to
SALT SETTING
.
6.
Press button three (3) or four (4) to
select
IRON & MN.
Press
button two (2)
until past PROGRAMMING COMPLETE
.
4. Press button two (2) to advance past
IRON & MN lbs
to
IRON & MN GRAINS
.
Press button four (4) to change 2500 to
2100.
5. Press button two (2) to advance to
BW Override.
Set
BW Override
to
OFF
.
6. Press button two (2) until past
PROGRAMMING COMPLETE
.
7.
Press and hold
button three (3)
and
four (4) until you hear a beep.
8.
Press button two (2) until you get to
LOCK VALUE.
9.
Press
button three (3)
or
four (4)
to
select LOCK. Press button two (2) until
past
PROGRAMMING COMPLETE
.
PRESS SETTINGS KEY
3 SEC TO UNLOCK
1. The display may read “PRESS SETTINGS
KEY”.
Press
button one (1)
for three
seconds (3) to unlock.
2.
After three (3) seconds, the display will
beep confirming unlock.
LOCK VALUE
UNLOCK
WATER SOURCE
WELL/OTHER
1.
Press and hold
button three (3)
and
four
(4) until you hear a beep.
2.
Press button two (2) until you get to
LOCK VALUE.
3.
Press
button three (3)
or
four (4)
to
select UNLOCK. Press button two (2)
until past
PROGRAMMING COMPLETE
.
1.
Press
button one (1)
for three seconds (3)
to unlock.
2.
Press
button one (1)
to advance to
WATER SOURCE.
3.
Press
button three (3)
or
four (4)
to
select WELL/OTHER. Press button
two (2)
until past
PROGRAMMING
COMPLETE
.
MANDATORY
Programming changes are necessary to
compensate for the injector conversion.
Once installed, you will need to make three (3) programming changes to the main user settings:
1. Change Iron & MN Grains Capacity
PROBLEM WATER INJECTOR KIT
START-UP INSTRUCTIONS
(CONTINUED)
2. Change Salt Setting
3. Change Water Source