8
9
Connector Pipes. 8” - 12”
#80127819
or 13” - 18” Tanks”
#80127817
Red Clips (4pcs)
#60010025
O Ring
#60010026
/ 1” BSP Straight (4pcs)
#60010016
6.
Parts
3.
Parts Box
60010006
Bypass Tool
60010026
O-Rings Attached
60090010
2 X 3/4”
Elbow
Adapters
60090026
Elbow, Inlet/Outlet, 1” NPT
Optional with some units
92360
Grease
Packet
Note: For upflow water softeners, a problem water injector
kit is enclosed. See Problem Water Injector Kit page for
usage information.
60010052
Transformer
1.
Control Valve
Note: Tanks come
preloaded with media
with the exception of
some larger systems
where the media will
come in containers.
This is due to weight
restrictions. Media will
need to be loaded
on site. See steps to
properly load media
contained in this
manual.
IMPORTANT:
PLEASE ENSURE THE ATTACHED
TUBE STIFFENER IS INSERTED
INTO THE BRINE LINE BEFORE
TIGHTENING
THE NUT.
There are 8 Red clips. Please
check to make sure you have
all of them.
Parallel Adaptor
7.
Tank 2
C/w Adaptor
2.
Tank 1
C/w Parallel
Adaptor
UNPACKING/INSPECTION
WARNING
RISK OF CHOKING
Discard all leftover parts and packaging materials after
installation. Small parts could be a choking hazard.
NOTE
Canature is NOT responsible for
damages in transit.
NOTE
Due to transportation and climatic conditions, all
connections, including the valve to the tank, need to
be checked at time of installation and hand
tightened, where necessary.
Be sure to check the entire unit for any shipping damage or parts loss. Also note damage to the shipping cartons. Contact the transportation
company for all damage and loss claims.
The manufacturer is not responsible for damages in transit
.
Small parts, needed to install the softener, are in a parts box. To avoid loss of the small parts, keep them in the parts bag until you are ready to
use them.
What is included in the box?
For Models 100, 150, 200, 250, 300, you will expect the following.
1.
Control Valve
2.
Tank 1 c/w Parallel Adaptor
3.
Parts Box
4.
Owners Manual
5.
Drain Hose & Clamp (Not included in some brands)
6.
Parts
7.
Tank 2 c/ Adaptor
Units 100, 150, 200, control valve installed on the tank, no
assembly required. Units 250, 300 require some assembly.
Summary of Contents for 185HTO
Page 2: ......
