30
5/8" hole in brine
well cap
Res-up feeder
1/4” Holes
AUTOMATIC RESIN CLEANER SOLUTION EASY FEEDER INSTALLATION
Optional ResCare Easy Feeders are devices that attach to your brine tank and automatically dispense the
ResCare cleaner into the brine solution where it cleans the resin during the regeneration cycle.
The Easy Feeder hooks onto the inside of your brine tank and feeds the cleaning solution into your brine
well. You MUST maintain the level of cleaner in the Easy Feeder for proper operation. A ResCare Easy Feeder
is essential if your raw water contains measurable amounts of Iron.
2.
Mark the location of the
holder and drill.
1.
Measure 2 inches from the
top of the tank beside the
oblong molding.
3.
Install the holder.
5.
Take off the small hole cover on
the Brine Well lid.
4.
Hang the ResCare bottle on
the hanger.
6.
Take off the cover of the ResCare bottle. Insert the wick,
making sure it touches the bottom of the bottle. Insert the
other end of the tube completely into the hole in the brine
well cap. Automatic feeding will start in a few hours.
SYSTEM MAINTENANCE
(CONTINUED)
RESCARE® EASY FEEDER INSTALLATION INSTRUCTIONS
ROUND BRINE TANK
RESCARE® EASY FEEDER INSTALLATION
INSTRUCTIONS SQUARE BRINE TANK
1.
Install the grid and brine well
inside the square tank.
3.
Mark the location of the holder
and drill.
2.
Measure 2 inches from the top
of the tank beside the oblong
molding.
4.
IInstall the holder and the
ResCare bottle.
Summary of Contents for 185HTO
Page 2: ......
