18
19
MANDATORY
Do NOT use an outlet that is controlled by
a light switch.
WARNING
if your power supply is subject to surges
or frequent outages, surge protection
is recommended to protect the
electronics in this product.
1.
Date & Time.
2.
Total U.S. Gallons, Remaining U.S. Gallons.
3
. People Reserve, Reserve U.S. Gallons.
4.
Estimated days to regeneration.
5.
Last regeneration - last date when system
backwashed.
6.
Total regenerations.
7.
Total treated.
8.
Overrun total.
9.
Current Flow Rate (GPM) – flow rate of water being
currently used.
10.
Peak Flow Rate (GPM) – maximum recorded flow
rate of the water.
11.
Day override.
12.
Rinse override.
13.
Delayed regeneration.
14.
Regeneration Time – time of day when
backwash starts.
15.
Refill time.
16.
Valve mode.
17.
Valve ID.
UNDERSTAND THE SCREEN & KEYPAD CONFIGURATION
Keypad Legend –
the terminology used on the conrol valve label may vary by model. For the purpose of programming, this manual will use
numbers associated with each button position as shown below:
The control valve is controlled with simple, user-friendly electronics, displayed on an LCD screen
.
CONNECT THE TRANSFORMER
Connect the transformer to the unit by plugging the 12 volt transformer into a 120 VAC 60 Hz outlet
.
When the power is connected, the screen will show the following information in sequence:
Summary of Contents for 185HTO
Page 2: ......
