pg. 3
• obtain fan motor
•
remove cotter pin and bolt from yoke
• loosen jam sc
r
ew in yoke until it is flush with the inside surface
• obtain dow
rod, canopy, canopy cover and yoke cover
• place down
rod inside canopy, canopy cover and yoke cover
•
route wires and safety cable exiting motor through canopy and downrod
• insert bolt th
rough hole in shaft and downrod
*be careful not to damage or cut the fan wires
• secu
re bolt with cotter pin
• secu
re downrod in position by tightening jam screws and lock nut
• place glass motor housing onto motor top
• slide yoke cover (optional) over yoke
1. MOUNTING
*NOTE: all set screws must be checked and re-tightened where
necessary after installation.
INSTALLATION
DOWNROD MOUNT
jam screw
lock nut
motor
jam screw
yoke
cotter pin
bolt
yoke
jam
screw
