background image

CANARM LTD.

2157 Parkedale Ave.

Brockville, Ontario

K6V 5V6

PH: 613-342-5424

FX: 613-342-8437

CANARM LTÉE.

2555 Rue Bernard Lefebvre

Laval, Quebec

H7C 0A5

PH: 450-665-2535

FX: 450-665-0910

CANARM 5 YEAR LIMITED WARRANTY

“THANK YOU” for purchasing a Canarm product.  It is our policy to furnish you 
with high quality products at a fair price.  With proper installation your fan should 
provide you with years of money saving comfort.

This fan is guaranteed to be free from defects in workmanship and material for a 

period of five (5) years f

rom date of pur

chase.  Within the first (1) year f

rom date of 

purchase any defective product should be returned to your RETAIL OUTLET along 
with proof of purchase.  For the balance of the warranty, four (4) years, the MOTOR 
WINDINGS ONLY, shall be free of defects.  We will correct such defects or replace 
the motor assembly at our option if the product is returned, FREIGHT PREPAID, to 
Canarm.  The returned fan must be accompanied by your proof of purchase and a 
cheque for $20.00 for handling and labour charges.  

All costs of removing and re-installing the product are YOUR RESPONSIBILTY.  
Damage to any part as such by accident, misuse, improper installation or by 

affixing any accessories IS NOT cove

red by this warranty.  As a result of varying 

climatic conditions in our area this warranty does not cover any changes in 

finishes, including rusting, pitting, cor

roding, tarnishing or peeling.

WARRANTY VOID:  In cases of alteration, abuse, installation not in accordance 
with instructions or REMOVAL of the cUL Sticker.

Summary of Contents for CITIE

















Reviews: