20
Important
Removal of the pressure cap when the engine is hot can cause severe injury from
scalding hot water under pressure. Always allow the engine to cool and then use
a large cloth when turning the cap anti-clockwise to the stop. This allows the
pressure to be released. Press firmly down on the cap and continue to turn
anticlockwise to release the cap.
(i)
Repeat (h) if coolant level is more than 25mm below the base of the filler
neck when the engine has cooled down.
(j)
Run engine on
2
/
3
speed for 20 minutes, check for leaks and repeat (i)
(k)
Anti-freeze solutions should be drained off every 500 hours or 2 years
which ever is sooner, and replaced with a new solution.
Engine water filler
cap, integrated into
the header tank.