7
remove dipsticks whilst engine is running, as this can cause oil to blow out. All
oil must be removed from the skin to prevent infection.
Scalding
An engine running under load will have a closed circuit fresh water
temperature of 71° to 85°C. The pressure cap on the top of the header tank
must not be removed when the engine is running. It should only be removed
when the engine is stopped and has cooled down.
Transportation/Lifting
Engines are supplied on transportable pallets. Lifting eyes on engines are
used for lifting engine and gearbox assembly only, not the pallet and
associated kit.
GENERAL DECLARATION
This machinery is not intended to be put into service until it has been
incorporated into or with other machinery. It is the responsibility of the
purchaser/installer/owner, to ensure that the machinery is properly guarded and
that all necessary health and safety requirements, in accordance with the laws of
the relevant country, are met before it is put into service.
Note: Recreational Craft
Where applicable, the purchaser/installer/owner and operator must be
responsible for making sure that the Recreational Craft Directive 94/25/EC is
complied with.
